[DeTomaso] Protecting the inside of frame rails and area behind doors, and material for firewall

[Jeff Detrich]

Plus make sure your rockers have the drain holes drilled. Done properly,
those holes are also drilled into the bracing that comes down the side of
the A and B pillars which end inside the rockers. You can't see it, but
they are in there and need to be drilled. Normally I'd have pictures but my
regular pc is down.

Jeff
6559


On Fri, Feb 7, 2014 at 9:13 PM, <MikeLDrew at aol.com> wrote:

>
> In a message dated 2/7/14 10 19 15, davel at emspace.com writes:
>
>
> Was there originally a drain down through the rocker panel?
>
>
> >>>There are a series of drains where the bottom of the outer rocker panel
> joins the inner and middle rocker panel.  See attached photo of one of
> them.  The center of the car is towards the top of the photo.
>
> There is a pipe that comes from the wiper grille area and drains down to
> the ground, just inboard of the front part of the rocker (easily seen when
> you look in the front fenderwell).
>
> Mike
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20140209/3474b44f/attachment.html>