[DeTomaso] Engine rebuild

[Daniel C Jones]

Like Mike says, the info is scattered around the web as I don't have a
personal website.  Here are a few engine builds we've done with
different Cleveland style heads:

408C with iron 4V heads and 5500 RPM street hydraulic roller cam (made
468 HP through mufflers with Ford low rise dual plane and 483 HP with
Holley Strip Dominator):

 http://pantera.infopop.cc/eve/forums/a/tpc/f/5650045562/m/5690015564
 http://poca.com/pipermail/detomaso/2006-November/078498.html only
made 468 HP at this point with dual plane Ford intake

Mike Drew's 526HP @ 6000 RPM 408C with unported CHI-4V heads, ported
Blue Thunder dual plane intake manifold and hydraulic roller cam:

 http://www.gearheadtalk.com/forums/showthread.php?24678-Dyno-Results-for-a-Street-Pantera-408C&highlight=Mike+Drew+408C

550+ HP 408C with TFS 2V CNC ported heads and street hydraulic roller
peaking at 6000 RPM:

 http://www.gearheadtalk.com/forums/showthread.php?33187-Trick-Flow-PowerPort-Cleveland-heads

Pantera 403C for my daily driver Pantera that made 569 HP peaking at
6350 RPM with old Ford Motorsport A3 aluminum high port Cleveland
heads and hydraulic roller cam:

 http://www.gearheadtalk.com/forums/showthread.php?30922-Pantera-403C-on-the-Dyno

Kelly Coffield 602 HP @ 6400 RPM with lightly ported C302B heads,
Roush intake, 10:1, Reed solid roller (during break-in, without
tuning):

 http://www.the351cforum.com/viewtopic.php?f=3&t=26

Dave McLain 438 cubic inch Clevor with unported CHI 3V heads and
intake, Demos street solid roller, 10.5:1 that made 666 HP at 6300 RPM
and 627 ft-lbs through the mufflers for street Pantera:

  http://www.network54.com/Forum/119419/thread/1297989634/Dyno+Results+from+Another+Pantera+Stroker

The 351C dyno mule write ups are scattered about but shoould be in the
email list archives.  Then there are the 351C FYI tips and the intake
manifold list along with several other engine build write ups I should
do but I just don't have the time right now.  Is there something
specific you are looking for?

Dan Jones