[DeTomaso] ZF gear oil
B Hower
b.hower3400 at yahoo.com
Sat Apr 12 22:57:03 EDT 2014
FWIW: Dennis Q. told me to not use synthetic oil in the ZF
Bud #3400 ( Drive it like there is no tomorrow -- for there may not be ! )
________________________________
From: Corey Price <coreyjprice at gmail.com>
To: MikeLDrew at aol.com
Cc: detomaso at poca.com
Sent: Friday, April 11, 2014 11:55 PM
Subject: Re: [DeTomaso] ZF gear oil
Mike,
Okay, I just opened the ZF manual for the Dash-2 that I have and it
says "Mild EP gearbox oils of viscosity class SAE 80 should be used.
Mild gear oil types are those EP oil grades which in the presence of
condensation do not cause corrosion on steel and non-ferrous metal
parts and hardening of gaskets and seals. The oils must meet our
Lubrication Requirements for ZF-Transmission Nr. 13-118. Under these
conditions, EP gear oils SAE 80 corresponding to specification
MIL-L-2105 (A) can be used. In case of doubt, check with the oil
supplier or ask our after sales service for the ZF-Lubrication List for
ZF Synchro Gearboxes".
I didn't see any reference to GL-5 in that but I'm not an expert.
Just food for thought, here's a possibly related discussion that I got
after searching the 'net:
[1]http://www.ratwell.com/technical/GearOil.html
Interesting but part of the webpage contradicts Lloyd's FAQ reasoning
about hyphoid and spiral bevel gears.
Maybe a call to Lloyd B. or Dennis Q. would help here. A friend of
mine likes the Penzoil synthetic GL-4. I have Brad Penn GL-4 in my box
currently. I'm definitely interested if Lloyd or Dennis say otherwise.
Corey
On Apr 11, 2014, at 10:08 PM, [2]MikeLDrew at aol.com wrote:
In a message dated 4/11/14 21 02 26, [3]coreyjprice at gmail.com
writes:
I thought GL-4 was the recommended oil, per Lloyd's website "FAQ"
section. Did I miss something?
>>>I thought so too--so much so that I actually filled my gearbox
with GL4.
Then, and only then, did I RTFM!!! :>)
The Pantera owners manual very, very clearly states that GL5 is the
lube of choice.
I looked at the RBT recommendation for GL4 but I think that is
specifically referencing the new gearboxes he is building now,
rather than our 'classic' gearboxes. The new ones have very little
parts interchange with the old ones, believe it or not, being more
closely related to the BMW M1 version of the ZF. They are a
different animal, with different lube needs.
Or so it seems to me....
Mike
References
1. http://www.ratwell.com/technical/GearOil.html
2. mailto:MikeLDrew at aol.com
3. mailto:coreyjprice at gmail.com
_______________________________________________
Detomaso Forum Managed by POCA
DeTomaso mailing list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso_poca.com
-------------- next part --------------
FWIW: Dennis Q. told me to not use synthetic oil in the ZF
Bud #3400 ( Drive it like there is no tomorrow -- for there may not be
! )
__________________________________________________________________
From: Corey Price <coreyjprice at gmail.com>
To: MikeLDrew at aol.com
Cc: detomaso at poca.com
Sent: Friday, April 11, 2014 11:55 PM
Subject: Re: [DeTomaso] ZF gear oil
Mike,
Okay, I just opened the ZF manual for the Dash-2 that I have and it
says "Mild EP gearbox oils of viscosity class SAE 80 should be used.
Mild gear oil types are those EP oil grades which in the presence of
condensation do not cause corrosion on steel and non-ferrous metal
parts and hardening of gaskets and seals. The oils must meet our
Lubrication Requirements for ZF-Transmission Nr. 13-118. Under these
conditions, EP gear oils SAE 80 corresponding to specification
MIL-L-2105 (A) can be used. In case of doubt, check with the oil
supplier or ask our after sales service for the ZF-Lubrication List
for
ZF Synchro Gearboxes".
I didn't see any reference to GL-5 in that but I'm not an expert.
Just food for thought, here's a possibly related discussion that I
got
after searching the 'net:
[1][1]http://www.ratwell.com/technical/GearOil.html
Interesting but part of the webpage contradicts Lloyd's FAQ reasoning
about hyphoid and spiral bevel gears.
Maybe a call to Lloyd B. or Dennis Q. would help here. A friend of
mine likes the Penzoil synthetic GL-4. I have Brad Penn GL-4 in my
box
currently. I'm definitely interested if Lloyd or Dennis say
otherwise.
Corey
On Apr 11, 2014, at 10:08 PM, [2][2]MikeLDrew at aol.com wrote:
In a message dated 4/11/14 21 02 26, [3][3]coreyjprice at gmail.com
writes:
I thought GL-4 was the recommended oil, per Lloyd's website "FAQ"
section. Did I miss something?
>>>I thought so too--so much so that I actually filled my gearbox
with GL4.
Then, and only then, did I RTFM!!! :>)
The Pantera owners manual very, very clearly states that GL5 is the
lube of choice.
I looked at the RBT recommendation for GL4 but I think that is
specifically referencing the new gearboxes he is building now,
rather than our 'classic' gearboxes. The new ones have very little
parts interchange with the old ones, believe it or not, being more
closely related to the BMW M1 version of the ZF. They are a
different animal, with different lube needs.
Or so it seems to me....
Mike
References
1. [4]http://www.ratwell.com/technical/GearOil.html
2. mailto:[5]MikeLDrew at aol.com
3. mailto:[6]coreyjprice at gmail.com
_______________________________________________
Detomaso Forum Managed by POCA
DeTomaso mailing list
[7]DeTomaso at poca.com
[8]http://poca.com/mailman/listinfo/detomaso_poca.com
References
1. http://www.ratwell.com/technical/GearOil.html
2. mailto:MikeLDrew at aol.com
3. mailto:coreyjprice at gmail.com
4. http://www.ratwell.com/technical/GearOil.html
5. mailto:MikeLDrew at aol.com
6. mailto:coreyjprice at gmail.com
7. mailto:DeTomaso at poca.com
8. http://poca.com/mailman/listinfo/detomaso_poca.com
More information about the DeTomaso
mailing list