[DeTomaso] NPC: speed (Pal) nuts
doug351c
doug351c at gmail.com
Sat Apr 5 19:30:51 EDT 2014
I checked my local ACE and no dice. They have the flat rectangular kind but
not the domed-hex with washer type.
Doug
-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at poca.com]On Behalf Of Tom
Shinrock
Sent: Saturday, April 05, 2014 12:39 PM
To: detomaso at poca.com
Subject: Re: [DeTomaso] NPC: speed (Pal) nuts
I'd be surprised if Ace Hardware didn't have this.
Tom
5186
-----Original Message-----
From: doug351c <doug351c at gmail.com>
To: POCA Forum Mailing List <detomaso at poca.com>
Sent: Sat, Apr 5, 2014 3:16 pm
Subject: [DeTomaso] NPC: speed (Pal) nuts
Anyone run across a supplier for this type of speed nut (see attached pic).
I need it to fit a #6 sheet metal screw with the most common type "AB"
thread/point which I believe is 20 threads per inch.
I've also seen these called "Pal" nuts but the Pal type may only apply to a
machine thread which in this case would be 6-32.
Which brings up another question - anyone seen a size chart for sheet metal
screw thread pitches?
BTW: I need this to restore a vintage Gibson guitar amp for my son Steve.
Doug Braun
blue 73L #5505
_______________________________________________
Detomaso Forum Managed by POCA
DeTomaso mailing list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso_poca.com
More information about the DeTomaso
mailing list