[DeTomaso] Recommendations for ZF Polishing Services
Tom Shinrock
tmshinro at aol.com
Fri Apr 4 09:26:09 EDT 2014
Polished ZFs do look nice but I always wondered how long they stay looking like that. Is a clear coat sprayed on after the polish? Otherwise I would suspect that it would oxidize eventually.
Tom
5186
-----Original Message-----
From: James coyne <tecnosound at hotmail.com>
To: detomaso <detomaso at poca.com>
Sent: Thu, Apr 3, 2014 8:55 pm
Subject: Re: [DeTomaso] Recommendations for ZF Polishing Services
I was visiting Lloyd Butfoys shop once and saw a ZF Trans that he had
sent out to be polished and was absolutely incredible. Don't know who
he uses but it looked awesome.
> From: cengles at cox.net
> To: wparmele at hotmail.com; detomaso at poca.com
> Date: Thu, 3 Apr 2014 20:38:21 -0500
> Subject: Re: [DeTomaso] Recommendations for ZF Polishing Services
>
> Dear William,
>
>
> I have not had this done, but I would suspect that for a
> proper full polish and bling job that you would need to remove the ZF
and
> send it off to someone with experience and qualifications. Do you
expect
> to pull the transaxle? Is it already out of the car?
>
>
> Warmest regards, Chuck Engles
>
>
>
> -----Original Message-----
> From: DeTomaso [mailto:detomaso-bounces at poca.com] On Behalf Of
William
> Parmele
> Sent: Thursday, April 03, 2014 6:31 PM
> To: detomaso at poca.com
> Subject: [DeTomaso] Recommendations for ZF Polishing Services
>
> To Fellow Owners/Enthusiasts,
>
> I am interested in finding someone who can do an excellent job
polishing the
> main and rear cases of my transaxle. I know several of you have
polished
> your transaxle yourselves or have had someone else do this for you. I
have
> had a couple people in the past do this, but was very disappointed
with
> their work. They polished the easy portions of the parts and missed
the more
> difficult " nooks and crannies". Can anyone recommend someone who Is
good
> at performing this service?
>
> Thanks!
> Bill Parmele
> Gainesville, FL 32653
> wparmele at Hotmail.com
>
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
_______________________________________________
Detomaso Forum Managed by POCA
DeTomaso mailing list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso_poca.com
-------------- next part --------------
Polished ZFs do look nice but I always wondered how long they stay
looking like that. Is a clear coat sprayed on after the polish?
Otherwise I would suspect that it would oxidize eventually.
Tom
5186
-----Original Message-----
From: James coyne <tecnosound at hotmail.com>
To: detomaso <detomaso at poca.com>
Sent: Thu, Apr 3, 2014 8:55 pm
Subject: Re: [DeTomaso] Recommendations for ZF Polishing Services
I was visiting Lloyd Butfoys shop once and saw a ZF Trans that he had
sent out to be polished and was absolutely incredible. Don't know who
he uses but it looked awesome.
> From: cengles at cox.net
> To: wparmele at hotmail.com; detomaso at poca.com
> Date: Thu, 3 Apr 2014 20:38:21 -0500
> Subject: Re: [DeTomaso] Recommendations for ZF Polishing Services
>
> Dear William,
>
>
> I have not had this done, but I would suspect that for a
> proper full polish and bling job that you would need to remove the ZF
and
> send it off to someone with experience and qualifications. Do you
expect
> to pull the transaxle? Is it already out of the car?
>
>
> Warmest regards, Chuck Engles
>
>
>
> -----Original Message-----
> From: DeTomaso [mailto:detomaso-bounces at poca.com] On Behalf Of
William
> Parmele
> Sent: Thursday, April 03, 2014 6:31 PM
> To: detomaso at poca.com
> Subject: [DeTomaso] Recommendations for ZF Polishing Services
>
> To Fellow Owners/Enthusiasts,
>
> I am interested in finding someone who can do an excellent job
polishing the
> main and rear cases of my transaxle. I know several of you have
polished
> your transaxle yourselves or have had someone else do this for you. I
have
> had a couple people in the past do this, but was very disappointed
with
> their work. They polished the easy portions of the parts and missed
the more
> difficult " nooks and crannies". Can anyone recommend someone who Is
good
> at performing this service?
>
> Thanks!
> Bill Parmele
> Gainesville, FL 32653
> wparmele at Hotmail.com
>
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
_______________________________________________
Detomaso Forum Managed by POCA
DeTomaso mailing list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso_poca.com
More information about the DeTomaso
mailing list