[DeTomaso] Fuse box, what's your experience?

[Ed Pike]

I have had Jon's (Pantera Electronics) fuse panel in my car for 4 or 5
years now with ZERO problems! Everything Jon makes its top quality.

Thanks,

Ed...
On Oct 20, 2013 3:04 PM, "John Buckman" <jb841 at cox.net> wrote:

> I've installed several of these fuse panels with no installation problems,
> and I concur with all of the positive comments about the PE fuse panel, and
> JP's heat gun suggestion helps.  I will add that removing some of the tape
> that is wrapped around the wire bundle also helps with "massaging" the
> wires after their 40+ year nap.
>
> The fuse panel attachment on the '71 cars is via studs that are welded to
> the body.  Later cars have metric screws that attach the fuse panel to the
> body (unless someone has butchered the installation by using sheet metal
> screws).
>
> Adding a spacer between the PE fuse panel and the body will allow better
> access to the fuses that are located near the fuse panel door tab.  One
> standard 1/4" nut worked as a quick spacer on the '71 cars.
>
> On the cars with fuse panel mounting screws, a longer screw can be
> purchased if needed.
>
> I will attempt to add a couple of pics.
>
> John
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20131020/2e053ac4/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PE 1.jpg
Type: image/jpg
Size: 89521 bytes
Desc: not available
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20131020/2e053ac4/attachment.jpg>