[DeTomaso] Fan shroud dimensions
MikeLDrew at aol.com
MikeLDrew at aol.com
Wed May 29 23:11:36 EDT 2013
In a message dated 5/29/13 16 50 28, tmshinro at aol.com writes:
> I received the condenser today and measured the dimensions of their
> mounting studs and then compared them to the dimensions of the mounting holes in
> the shroud. The condenser and shroud lined up at 6.25 inches from top to
> bottom, however the condenser measured 17.5 inches from left to right while
> my shroud measured 19 inches. I'm talking about the holes in the sides of
> the shroud and not the holes where the shroud bolts to the car body.
>
> I would like to hear back from others on what their shroud mounting hole
> dimensions are. I've seen several different styles of shrouds so I don't
> know if the condenser was made to fit a different shroud or if the condenser
> was made to the wrong dimensions.
>
>>>My shroud is also 19 inches. The early shroud has a completely
different shape, and may have different dimensions. It's possible your condensor
was created for an early shroud?
Mike
More information about the DeTomaso
mailing list