[DeTomaso] Clutch Slave Bolt Sizes

[MikeLDrew at aol.com]

In a message dated 8/8/13 12 30 7, rgg at gregorycook.com writes:


> There are 3 bolts that attach the slave to the bell housing. one is 
> actually one of the through bolts that hold the bell housing to the block and is 
> in fact a 7/16ths bolt. The other two thread into threaded bosses on the 
> bell housing. those are the two M8 x 1.25 bolts you are referring too in the 
> parts book.
> 

>>>Ah, yes, of course that makes great sense!   In that case, the 7/16 bolt 
is 7/16 x 14 x 5 1/2 inches according to Wilkinson's website.

Mike