[DeTomaso] Rocker arm alignment

[Mikael]

Looks like crummy work. I would take it back. If you fix it, will you void
any warranty, if there is any? If I were the builder, I would, besides
hiding my head in shame, not warrant anything where the customer had changed
the alignment

Mikael

-----Oprindelig meddelelse-----
Fra: sean mundy [mailto:seanmundy at hotmail.com] 
Sendt: 18. september 2012 20:24
Til: detomaso at realbig.com
Emne: [DeTomaso] Rocker arm alignment


Just got my engine back from the builder.  After I got over the bling factor
I noticed some of the rockers are not lined up directly over the top of the
valve stem tip.  
See picture links.  These CompCam rockers are installed on CHI 3v heads.
I've rotated the engine several times and the alignment doesn't differ.  
All of roller tips are hitting the center of the valve stem so I think the
pushrod lengths are good.  
It's just the offset side to side on a couple of the rockers that has me
worried.   
Appreciate any opinions.
http://poca.com/index.php/gallery/?g2_itemId=38019
http://poca.com/index.php/gallery/?g2_itemId=38017