[DeTomaso] windshield wiper motor wiring

[gow2 at rc-tech.net]

If you get in a real pinch I set mine up with an aftermarket kit:

http://www.rc-tech.net/cars2/panttransam/Wiper/Wiper1.jpg

http://www.rc-tech.net/cars2/panttransam/Wiper/Wiper3.jpg


> My wiper motor was not working properly. It would rotate with no load
> present  ( the wiper cable drive not installed ) I dissasembled the drive
> mechanism and cleaned everything and the motor now turns at a high rpm.
>  My wiper motor has three wires (red, yellow , and blue) only the red and
> yellow were connected. My question is which wire is supposed to be the
> positive and which the ground . My second question is of the two wires
> that
> are not the ground which wire will provide the higher rpm?
> Thanks,
> Boyd
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at realbig.com
> http://realbig.com/cgi-bin/mailman/listinfo/detomaso
>