[DeTomaso] Stock clutch master cylinder rebuild kit?

[jderyke at aol.com]

I use the same type of aluminum clutch master (mine is an early Girling), which is rebuildable and gives a little more clearance for a larger diameter aftermarket brake booster. The adapter is necessary since DeTomaso undersized the bolt pattern on stock units so nothing else bolts on (except billet). FWIW- J DeRyke



-----Original Message-----
From: gow2 <gow2 at rc-tech.net>
To: Jerry Knotts <knottsj at galstar.com>
Cc: DeTomaso List <detomaso at realbig.com>
Sent: Tue, Nov 13, 2012 5:18 am
Subject: Re: [DeTomaso] Stock clutch master cylinder rebuild kit?


I make a clutch adapter to adapt a common Wilwood as an alternative:

http://www.qualityfabparts.com/shop/page5.html

Gary

> In trying to review clutch master cylinder rebuilds.  SOBills database
> lists them as BAP GEON 26-06300.  My local parts guys give me the 1000yd
> stare.  I was told by a Pantera vender that kits for the original master
> cylinder kits no longer exist and I must purchase a new Billet cylinder.
> Say it isn't so .
>
> Pumping clutch between each shift,
> jerry knotts
> knottsj at galstar.com
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at realbig.com
> http://realbig.com/cgi-bin/mailman/listinfo/detomaso
>

_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at realbig.com
http://realbig.com/cgi-bin/mailman/listinfo/detomaso