[DeTomaso] MSD wiring diagram?

[David Fisher]

Mike,

He can find the wiring diagram for the typical Ignition box on the MSD site
at

http://www.msdperformance.com/product.aspx?id=16013

It's the gray wire (but he should check the exact ignition box he has) that
goes into the tach adaptor.   I just did this recently but dont recall the
part number of the tach adaptor.  With that part number in hand, one can
search MSD support page for the instructions, but it's pretty straight
forward.   1 input (gray wire from MSD igition), power, ground and 1 output
(to the Pantera tach - which if memory serves me is a blue / black wire)

David



On Wed, Dec 12, 2012 at 1:36 PM, <MikeLDrew at aol.com> wrote:

> Hi guys,
>
> A friend in New Zealand asked me which wiring diagram is appropriate for
> hooking up the MSD ignition/tach adapter to his Pantera.   I'm on the road
> without access to my notes at home.
>
> I thought Bill had put together a wiring diagram for the MSD setup since
> it's so common, but on PanteraPlace all I can find are the stock schemes
> (early and late).   Am I correct in reading that the stock tach wire comes
> off
> the negative side of the coil?
>
> Does somebody have a link to a plain-and-simple diagram applicable to the
> Pantera that shows exactly how to wire in the MSD setup?
>
> THANKS!
>
> Mike
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso
>