[DeTomaso] Signal-cancel cam
SOBill at aol.com
SOBill at aol.com
Tue Aug 21 17:46:31 EDT 2012
Dave,
With the front wheels straight ahead and the steering wheel centered, if
the cam points to 9 o'clock, you are good to go. If the cam doesn't point to
9 o'clock:
Mark the position of the steering wheel relative to the steering column
with a magic marker or center punch a couple of dots. Pull the steering wheel
or steering wheel adapter off the steering column.. This will require
making up or buying some type of steering wheel puller.
If your cam was at 3 o'clock, turn the cam to 9 o'clock. Your steering
wheel or adapter must have a second slot at 9 o'clock which will accept the
small tang on the cam which cause the cam to turn with the steering wheel.
Reinstall the steering wheel with the tang on the cam in the 9 o'clock slot
and original position markers aligned.
Have fun today,
sobill at aol.com
In a message dated 8/21/2012 11:40:05 A.M. Pacific Daylight Time,
davel at emspace.com writes:
OK - too much travel at 3:00 I guess.
Any clue on the method?
dave
More information about the DeTomaso
mailing list