[DeTomaso] Balance Point for Engine/Transaxle Removal

Dave Londry davel at emspace.com
Tue Nov 1 18:50:55 EDT 2011


My leveller went over an AirGap just fine.
Balances just behind the #4 - #8 CL.
dave


On 01/11/2011 3:28 PM, Daniel C Jones wrote:
>> The balance point is roughly over the oil pressure sender at the back of the
>> block, when the gearbox is connected to the engine.
> Thanks guys for the pics and suggestions.  For some reason I had brain fade
> on this.  With the low intake manifold currently installed, I should be able to
> use the load leveler with 4 point mounting (chain across heads front and rear).
> With a taller intake, it's probably easier to just use a chain across the back
> of the heads.
>
>> If you're not going to use the load leveler you may as well send it back to
>> it's home.... :)
> Send me that shipping address or I can give it to Kirk to drop off.
> He's coming
> through on his way back from Texas in week or so.
>
> Dan Jones
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>
>



More information about the DeTomaso mailing list