[DeTomaso] bump steer kit
Asa Jay Laughton
asajay at asajay.com
Mon May 9 19:47:50 EDT 2011
1973 L model SN 5533 is mine and we found it already had the bump
steer kit installed, from the factory (or dealer).
Asa Jay
Quoting MikeLDrew at aol.com:
>
> In a message dated 5/9/11 15 09 42, panteratime at aol.com writes:
>
>
>> Folks--
>> Im due for an alignment and before I went to a shop i thought i would
>> install the bump steer spacer I hear about. Can someone point me in the
>> direction with regard to where to get it? Someone mentioned Pelican
>> Parts-$14?
>> I assume its something i can install myself?
>>
>
> For some years, there were some highly dubious kits on the market that
> required you to drill out the already-thin holes in the spindle arms
> and install
> an adapter. A much better solution is to simply install 10mm spacers
> under the rack mounts.
>
> Your car is an L-model, isn't it? If so, it probably came with those
> spacers from the factory.
>
> Part #32A in this diagram:
>
> http://www.panterasbywilkinson.com/webpages/catalog/ill7c.html
>
> Chuck Melton sells kits with custom-machined spacers and the appropriate
> 10mm-longer bolts with lockwashers. But if your car is an L-model you
> probably don't need to do anything.
>
> I don't know at which point the rack spacers were introduced....
>
> Mike
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>
--
Asa Jay Laughton - sent from somewhere other than home
******************************************************
http://www.racingagainstautism.com
http://www.teampanteraracing.com
More information about the DeTomaso
mailing list