[DeTomaso] Max Seat width

[Rob Dumoulin]

I can only speak to my car with dropped floor pans on an early '71.  The
passenger side which is the tighter fit due to to the parking brake is 21"
at the base.  I've trimmed down my parking brake box and have 20" across.
 It's probably 19 1/2" with the stock parking brake box.. Granted, the seat
cushion is higher and wider than the base, I have no way to tell you if that
would fit. There should be no problem with the shoulder width if you can get
the base in. It is 38" from bottom of a dropped floor pan to the headliner
straight up.  Subtract a few inches for the dropped floor pan and it seems
these seats would be close if not too high.

On Thu, Mar 31, 2011 at 1:08 PM, robert stewart <rspink2012 at yahoo.com>wrote:

> Does anyone know the max size of a seat that will fit in a Pantera.   I am
> away
> from my car and can't measure.  I have a line on some nice Sparco seats .
> The
> lower seat cushion width is 21".  The Shoulder width is 22.5" and the
> height of
> the seat is 36.5 ".
>
> Anyone know if these would fit?
>
> Thanks
>
> Rob
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>



-- 
Rob DuMoulin
904.476.8744
rob at dumoulins.net