[DeTomaso] MSD distributor
Charles Engles
cengles at cox.net
Sun Jun 5 11:26:45 EDT 2011
Dear Bill,
I vaguely recall that Jack DeRyke has mentioned that if you power
the ignition system off the wrong power source that you can get an effect
much like you're experiencing. I am suspicious that my be the cause, but I
don't do electricity well and this is a very unqualified comment.
Hopefully, better info will be forthcoming.
Warmest regards, Chuck Engles
-----Original Message-----
From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] On
Behalf Of BillsStore at aol.com
Sent: Sunday, June 05, 2011 9:24 AM
To: detomaso at realbig.com
Subject: [DeTomaso] MSD distributor
Installed a MSD drop-in distributor and initially had it hooked up to a
Mallory ignition system coil. It would run up to 5500 RPM then flat line
like it had a rev limiter. Slowly RPM backed down to 5000RPM Friend gave
me
a "old" MSD II coil to try. It is flat lining now at 4500 RPM. Have a new
coil on order. If that fails, anyone have an idea what it could be?
Bill Vasser
_______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list