[DeTomaso] Darn speedo cable

[CharlesMcCall]

Larry - for the moment, I'm still struggling with the speedo end and haven't
even thought about the zf end!

Thanks though

-----Original Message-----
From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] On
Behalf Of Larry Finch
Sent: lunes, 25 de julio de 2011 23:15
To: detomaso at realbig.com
Subject: [DeTomaso] Darn speedo cable


 Charlie,

Following John's ideas, perhaps you should disconnect the ZF end which I
think is now connected,
and THEN see if you can get the under-the-dash speedo connection to
cooperate.

If that gives success, I'd think that would point to the actual drive cable
being too long for the cable housing.

Plus it might move the problem end to a location that will be much easier to
work with.  ;-)

Is it possible one or both ends are not fully seating in their respective
device?

Larry

 


_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso