[DeTomaso] ZF ACORN NUTS
mikeldrew at aol.com
mikeldrew at aol.com
Tue Jul 19 13:06:51 EDT 2011
Bob wrote:
Not knowing.....my restoration shop installed the acorn
uts and when the nut bottomed out they just tightened away pushing the stud
nto the ZF REAR casing. I backed out the stud located at 10:30 and put the
riginal nut in place and then covered it with the acorn nut.
>>>Glad you found the source of the problem, but now your sealing acorn nut, isn't.
What you need to do is use a cutoff wheel to shorten the protruding end of the stud, so that the acorn nut will bottom out on the surface of the rear cover. I had to shorten 3-4 of my studs when I switched to sealing acorn nuts. No more leaks!
Mike
More information about the DeTomaso
mailing list