[DeTomaso] Oil Pressure outlet

[JDeRyke at aol.com]

In a message dated 7/3/11 5:59:02 AM, wdemelo at cogeco.ca writes:

> I want to install another oil press gauge. I' m restricted from using the 
> port where the original sender is mounted because of my fuel rail 
> crossover.
> Where is another port I can pick this up from and what size is the port?
> 

The simplest is the port next to the fuel pump, but that pressure is 
directly out of the pump so it won't relate to anything you know about your 
engine's oil pressure or any of your friends: it will be 15-30 psi higher. Same 
thread as the rear port and you can use a stock 351-W oil pressure extension. 
But I would try real hard to pick up the pressure at the stock position- 
maybe with a hose to the port. Good luck- J Deryke