[DeTomaso] Oil Pressure outlet

[B Hower]

To all,
In my priming oil tests to get the hole in left front galley plug and directed where I wanted it to aim, I had the guage hooked up at both ports and found no major difference. I thought the pressure pulsed some at front port but not after I tied front and rear ports together and monitoring from the front.
 
Bud #3400
 


--- On Sun, 7/3/11, Mike Thomas <mbefthomas at comcast.net> wrote:


From: Mike Thomas <mbefthomas at comcast.net>
Subject: Re: [DeTomaso] Oil Pressure outlet
To: "'Will DeMelo'" <wdemelo at cogeco.ca>, Detomaso at realbig.com
Date: Sunday, July 3, 2011, 2:27 PM


Isn't there a plug just to he side of the oil filter down on the side of the
block?  Seems that's where the folks who have run an external oil bypass up
to the top of the engine have picked it up.  I don't know if that's too
close to the pump to get an accurate reading or not.

Mike Thomas 

-----Original Message-----
From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] On
Behalf Of Will DeMelo
Sent: Sunday, July 03, 2011 5:59 AM
To: Detomaso at realbig.com
Subject: [DeTomaso] Oil Pressure outlet

I want to install another oil press gauge. I' m restricted from using the
port where the original sender is mounted because of my fuel rail crossover.
Where is another port I can pick this up from and what size is the port?

Will

_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso

_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso