[DeTomaso] Parts Recommendation

[MikeLDrew at aol.com]

In a message dated 1/2/11 19 05 48, jefude at yahoo.com writes:


> Header bolts - Any recommendations? Found a set called “Ramp –Lok”  
>  anyone ever use them?
> 

I'm extremely fond of ARP's small-head header bolts.   These are just 
normal 3/8 inch header bolts, except that they use a smaller 5/16th hex head 
instead of the normal 3/8th size.   This allows for much better wrench clearance 
around tight header pipes.

http://www.summitracing.com/parts/ARP-100-1110/

Mike