[DeTomaso] DeTomaso Digest, Vol 79, Issue 14-Smooth engine bay
GW
gow2 at rc-tech.net
Mon Feb 14 12:33:30 EST 2011
At least an engine bay is an easy area to respray once in a while.
G
RCBSONS1 at aol.com wrote:
> I had my engine bay filled with bondo 6 years back
> It held up on the track with the slight flexing but
> I have cracked it in a couple of places with rocks
> coming up.. might do that with or without bondo
> Sticky tires on the track at higher speeds
>
> I started to autocross the car and could see too
> many things trying to pull apart and fine cracks starting
> so I stopped the crossing
>
> I had the engine bay cleaned up and tweaked when the
> car was painted two 1/2 years back and all was fine
> until the Reno event... The end of the Back staight has
> a big bump you hit at 100mph and it sent a small crack
> in the lower side
>
> If you want to drive around and go easy then I think you
> will be fine... start twisting her up and putting the power
> down with sticky tires and I think it will crack
> I have a full cage, chassis braces, pinned deck
> and things still seem to want to move around back there
>
> My experince ..Bob Benson #3 black pantera
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>
>
More information about the DeTomaso
mailing list