[DeTomaso] Sensor Thread

[Will Demelo]

16.8mm straight cut

----- Original Message ----- 
From: "doug351c" <doug351c at gmail.com>
To: "Will Demelo" <wdemelo at cogeco.ca>; <detomaso at realbig.com>
Sent: Friday, February 04, 2011 7:41 PM
Subject: RE: [DeTomaso] Sensor Thread


> All of my thread references only show 16mm & 18mm as standard thread
> diameters.  What diameter do the threads measure exactly, it may be an SAE
> thread size.  And are they straight cut or taper threads?
>
> Doug Braun
> blue 73L #5505
>
> -----Original Message-----
> From: detomaso-bounces at realbig.com
> [mailto:detomaso-bounces at realbig.com]On Behalf Of Will Demelo
> Sent: Friday, February 04, 2011 1:08 PM
> To: detomaso at realbig.com
> Subject: [DeTomaso] Sensor Thread
>
>
> I have a temp sensor in my Quella IR air cleaner. I'm looking for the 
> thread
> pitch so I can drill/tap a new hole. I think it's a standard sensor that 
> is
> used on many vehicles. The pitch looks to be 1.5mm. OD is about 17mm?? Is
> this a standard thread?
> Will
>