[DeTomaso] OBX Mufflers
Asa Jay Laughton
asajay at asajay.com
Thu Apr 7 23:25:20 EDT 2011
I'd figure on cutting them right where they bend up. Just hack off the
bent-up part, turn the whole thing over and viola! Done.
I just can't bring myself to go down that road yet. I'd want to make
sure the cut was real good.
Asa Jay
Asa Jay Laughton, MSgt, USAFR, Retired
& Shelley Marie
Spokane, WA
******************************
http://www.racingagainstautism.com
http://www.teampanteraracing.com
http://facebook.com/racingagainstautism
On 4/7/2011 8:21 PM, Garth Rodericks wrote:
> Yup, those are the same ones, but with the bent tips. Bill Gaino on the PI board has those mufflers on his car.
> http://www.slickpaint.com/index.php?supermode=gallery_view&previewm=1&a=Pantera_stuff&image=101028095939_dsc00001.jpg&screenres=1440-900
>
> I imagine you could pretty easily cut those off and just weld on some nice straight tips for a lot than $100.
>
>
>
> ________________________________
> From: Ken Green<kenn_green at yahoo.com>
> To: Garth Rodericks<garth_rodericks at yahoo.com>
> Sent: Thursday, April 7, 2011 3:50 PM
> Subject: Re: [DeTomaso] OBX Mufflers
>
>
> Garth,
>
> what if you just cut the bent ends off these:
>
> http://cgi.ebay.com/ebaymotors/Forza-Dual-Muffler-DB004-2-5-Inlet-Universal-Exhaust-/180420558745
>
> Ken
>
> --- On Thu, 4/7/11, Garth Rodericks<garth_rodericks at yahoo.com> wrote:
>
>
>> From: Garth Rodericks<garth_rodericks at yahoo.com>
>> Subject: [DeTomaso] OBX Mufflers
>> To: "DeTomaso Mail List"<detomaso at realbig.com>, "Dan Jones"<daniel.c.jones2 at gmail.com>
>> Date: Thursday, April 7, 2011, 3:28 PM
>>
>>
>> The correct mufflers are the OBX DB001K as seen in this auction - these are the ones I bought:
>> http://cgi.ebay.com/ebaymotors/OBX-Dual-Muffler-2-5-Inlet-Exhaust-DB001k-_W0QQcmdZViewItemQQhashZitem2c59af87e0QQitemZ190483236832QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
>>
>> They are the SAME mufflers PI sells for $150 apiece - same muffler, box, packaging, etc. The only difference is that PI's mufflers don't have the OBX tag, which apparently pulls their value down by $100. :D And, these are the muffler that are now notoriously difficult to find.
>>
>>
>> Several PCNC members have them and think they're great. Although the entire muffler assembly is longer than the stock mufflers, it's within a couple inches. John
> Columbero had by Lupe in Redwood City (Meineke) who tucked them in nicely and they just look RIGHT.
>> Dan - I have a set that I'd be willing to loan you for the dyno project if shipping isn't too much. Send me shipping info and when you think you might need them.
>>
>> Cheers!
>> Garth
>> #4033
>>
>>
>>
>>
>> _______________________________________________
>>
>> Detomaso Forum Managed by POCA
>>
>> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>>
>> DeTomaso mailing list
>> DeTomaso at list.realbig.com
>> http://list.realbig.com/mailman/listinfo/detomaso
>>
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1209 / Virus Database: 1500/3558 - Release Date: 04/07/11
>
>
More information about the DeTomaso
mailing list