[DeTomaso] harness bar.

[MikeLDrew at aol.com]

In a message dated 9/14/10 13 08 41, red3644 at hotmail.com writes:


>    The normally used vendor bars mount the shoulder belts higher on the 
> inside than the outside.  No big problem, I just am aware of it sometimes
> 

The early cars have the shoulder harness bolts closer together than the 
later cars.   My shoulder harnesses are dead level, as the bar doesn't start 
turning downwards until a fair bit outboard of the outermost harness on both 
the driver's and passenger sides.

Mike