[DeTomaso] Campy powder coat color???

[michael@michaelshortt.com]

All I have heard is ARGENT SILVER, please sup[ply pix when finished,

Michael Shortt

On Tue, Oct 26, 2010 at 5:24 PM, Larry Finch <fresnofinches at aol.com> wrote:

>
>
>
>  I'm arranging the powder coating of a local owner's four stock Campys.
>
> They are in very good condition, no oxidation or chips.  CAPS here in
> Fresno usually stays
> away from magnesium pieces, but he saw one of the wheels and feels they
> will come out just fine.
>
> An 80 grit aluminum oxide blast to bare metal, a 400 degree pre bake, then
> rolled out and immediately
> powder coated while still at high temp, then into the oven to bake and
> leave to cool overnight with
> the end-of-day oven shut down to get them properly annealed.
>
> Does that sound right to you guys?
>
> Also, does anyone have a powder code # or name that they know is tried and
> proven, along with the supplier's name/brand?
>
> Any other advice?
>
> Thanks,
>
> Larry
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>



-- 







Michael L. Shortt
Savannah, Georgia
www.michaelshortt.com
michael at michaelshortt.com
912-232-9390


This email is protected by the Electronic Communications Privacy
Act, 18 U.S.C. Sec. 2510-2521, is confidential and may be legally
privileged.  If you are not the intended recipient, you are hereby notified
that any retention, dissemination, distribution or copying of this
communication is strictly prohibited.  Please reply to the sender that you
have received this message in error, then delete it.  Thank you