[DeTomaso] How does the billet plaque mount?

[MikeLDrew at aol.com]

In a message dated 7/25/10 22 27 43, davel at emspace.com writes:


> 6143 has no badging, so I bought on of those billet detomaso plaques.
> It arrived with 4 small hex cap-screws and I thought I'd find a matching
> spot on the lower-rear X-member.
> But no.
> So how do they mount?
> 

Drill appropriate-sized holes, and tap the appropriate threads so that the 
bolts thread into the holes in the chassis.   I actually used sheemetal 
screws as I think they are more secure.   For ultimate security, get really long 
bolts, drill all the way through both sides of the box channel and secure 
with nuts on the back side.

Mike