[DeTomaso] Chassis Drain Holes
Garth Rodericks
garth_rodericks at yahoo.com
Mon Jul 19 02:45:57 EDT 2010
Yes, I already checked that page. Excellent stuff, but it doesn't describe where
the holes in the lower frame rails should go. That's what I needed since I
already have the drain holes in the wheel house frames.
Anyway, in typical form, Bill Taylor came through and sent me exactly what I
needed. Thanks again Bill!
Cheers!
Garth
________________________________
From: "MikeLDrew at aol.com" <MikeLDrew at aol.com>
To: oldwheel at mts.net; detomaso at realbig.com; garth_rodericks at yahoo.com
Sent: Sun, July 18, 2010 10:46:16 PM
Subject: Re: [DeTomaso] Chassis Drain Holes
In a message dated 7/18/10 9:07:00 PM, oldwheel at mts.net writes:
There's a helpful article wrtten by Mike Drew on Mike Dailey's excellent
>site:
>
>http://www.panteraplace.com/page57.htm
>
Actually, although I contributed somewhat to that story, principally it was
written by Mike Dailey....
Mike
More information about the DeTomaso
mailing list