[DeTomaso] Cam walk.

[Tomas Gunnarsson]

I'd guess that none of the bearings in the block locates the cam fore/aft so whatever the expansion is along the cam it won't affect the axial bearings shown.

Tomas

----- Original Message ----- 
From: "Doug Braun" <doug at silicondesigns.com>
To: <hemipanter at hemipanter.se>; <detomaso at realbig.com>
Sent: Wednesday, January 06, 2010 5:04 PM
Subject: Re: [DeTomaso] Cam walk.


> Nice work Goran!  With zero end-play might there be a problem with thermal
> expansion?  The cam is quite long compared to the cover so it's expansion
> could cause a bind.
> 
> Doug Braun
> 
> -----Original Message-----
> From: detomaso-bounces at realbig.com
> [mailto:detomaso-bounces at realbig.com]On Behalf Of
> hemipanter at hemipanter.se
> Sent: Tuesday, January 05, 2010 3:39 PM
> To: detomaso at realbig.com
> Subject: [DeTomaso] Cam walk.
> 
> 
> Hav not been very much talk about "cam walk" on this board. So, here is a
> few lines about it. www.hemipanter.se klick "Fabrication pictures." Last
> part of it include my latest trix for a fix. I decided to try to modify a
> regular cam chain kit to do the job.
> Goran
> 
> 
> _______________________________________________
> 
> Detomaso Forum Managed by POCA
> 
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
> 
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso