[DeTomaso] correct fluid for clutch master

[JDeRyke at aol.com]

In a message dated 9/15/09 7:03:15 AM, JJD1010 at aol.com writes:

> Ok, so I probably would be best served with DOT 3/4. I am using 
> DOT5(silicone) now and they react badly with each other. What do I need to do 
> to change over to DOT 3/4? Do I need to flush my system?
> 
As I mentioned, the disadvantages of silicone aren't as severe in lower 
pressure clutch hydraulics system, so as long as you've spent the money and it 
doesn't leak, I'd suggest continuing until a problem surfaces. Then you can 
drain and flush with cheaper DOT-3 or DOT-4 mineral spirits. As you say, 
don't mix the two fluids. Good luck- J Deryke