[DeTomaso] Any Issue with using an Oil Pressure Gauge for Fuel Pressure???
Ken Green
kenn_green at yahoo.com
Mon Mar 16 19:24:01 EDT 2009
Jack,
The MSD gauges are "suppose" to be super accurate. This is a turbocharges injected application, so fuel pressure will be about 43 PSI + boost (using a boost reference pressure regulator). All the Autometer fuel pressure gauges are 15 PSI for carbs and 100 PSI for EFI.
Ken
--- On Mon, 3/16/09, JDeRyke at aol.com <JDeRyke at aol.com> wrote:
From: JDeRyke at aol.com <JDeRyke at aol.com>
Subject: Re: [DeTomaso] Any Issue with using an Oil Pressure Gauge for Fuel Pressure???
To: kenn_green at yahoo.com, detomaso at realbig.com
Date: Monday, March 16, 2009, 4:01 PM
In a message dated 3/16/09 3:38:54 PM, kenn_green at yahoo.com writes:
> The very cool MSD gauges being sold for about 1/4 retail include a 100 PSI
> oil pressure gauge. Is there any obvious reason why it couldn't be
used as a
> fuel pressure gauge?
>
None except for an accuracy issue- gauge accuracy is usually 2% or 5% of FULL
SCALE deflection, so a 0-15 psi carbureted gauge will be much closer to
correct than a 0-100 psi gauge if both were connected to the same fuel pump.
You
might be able to 'tweek' the accuracy in the gauge works if it makes
any
difference to you. FWIW- J Deryke
**************
A Good Credit Score is 700 or Above.
See yours in just 2 easy steps!
(http://pr.atwola.com/promoclk/100126575x1219850974x1201371016/aol?redir=http:%2F%2Fwww.freecreditreport.com%2Fpm%2Fdefault.as
px%3Fsc%3D668072%26hmpgID%3D62%26bcd%3DfebemailfooterNO62)
_______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list