[DeTomaso] Busted Big, but Reno anyway?

Thomas Tornblom Thomas.Tornblom at hax.se
Fri Jun 12 01:52:20 EDT 2009


I installed a hydraulic roller after wiping #5 intake in Italy 2004.

The Crane flat tappet hydraulic cam I had was installed in 2001 and had 
survived a trip to France, but with just the outer valve springs 
installed. When I pulled the heads to install hard exhaust seats I 
installed the inner springs as well, and that might have been too much 
for the modern formula Mobil 1 I use.

I doubt I will ever install a flat tappet cam again.

Thomas

Dan Courtney skrev:
> Dan,
> 
> Turns it WAS a brand new Crower cam and lifters.
> I've been having so many engines re-built I'm losing track.
> 
> Dan
> 
> Dan F. Courtney
> 
> La Jolla, CA
> 
> (858) 551-5455 Phone
> (858) 551-5456 Fax
>   ----- Original Message ----- 
>   From: Daniel Miller 
>   To: Dan Courtney 
>   Sent: Thursday, June 11, 2009 4:05 PM
>   Subject: Re: [DeTomaso] Busted Big, but Reno anyway?
> 
> 
>   Dan,  Just FYI.  No matter what anyone ever tells you, don't re-use a cam.  Always pony up for a new cam.  My 2 cents.  Dan Miller.
> 
> 
> 
> 
> ------------------------------------------------------------------------------
>   From: Dan Courtney <dfcex at pacbell.net>
>   To: detomaso at realbig.com
>   Sent: Thursday, June 11, 2009 4:39:03 AM
>   Subject: [DeTomaso] Busted Big, but Reno anyway?
> 
>   So I wrenched on The Winged Warrior till 4AM Monday and 5AM Tuesday, reviewed and improved allot of stuff, but it was still missing on at least one cylinder.
>   So I towed it to the engine shop disassembled, so they could inspect the gaskets for signs of leaking, get a better borescope view, etc.
>   Everything checked out till we started it, then found out it was cold on #2 (the cylinder with plugs that kept fouling). 
>   Turns out the intake lobe on the cam went flat.  It was re-used from the previous engine, after being profiled and inspected (by a well known local cam manufacturer).
>   The builder says there's bound to be metal in the pan, so now, after only 700 miles and one adventurous this new engine, and finally getting the installation PERFECT, it's gotta come out again, for the fifth time in six years.
>   There are times when you just feel the universe is in alignment to make sure you can't get behind the wheel of a Pantera.
> 
> 
>   Dan F. Courtney
> 
>   La Jolla, CA
> 
>   (858) 551-5455 Phone
>   (858) 551-5456 Fax
>   _______________________________________________
> 
>   Detomaso Forum Managed by POCA
> 
>   Archive Search Engine Now Available at http://www.realbig.com/detomaso/
> 
>   DeTomaso mailing list
>   DeTomaso at list.realbig.com
>   http://list.realbig.com/mailman/listinfo/detomaso
> _______________________________________________
> 
> Detomaso Forum Managed by POCA
> 
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
> 
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
> 
> !DSPAM:4a319c3327483163845084!
> 


-- 
Real life:   Thomas Törnblom             Email:  Thomas.Tornblom at Hax.SE
Snail mail:  Banvallsvägen 14            Phone:    +46 18 444 33 21
              S - 754 40 Uppsala, Sweden  Cellular: +46 70 261 1372




More information about the DeTomaso mailing list