[DeTomaso] Wheel bolt/stud and Brake rotor
MikeLDrew at aol.com
MikeLDrew at aol.com
Thu Apr 23 04:08:02 EDT 2009
Anders,
You wrote:
> questions 1
> Is it only the length as are difference between STD Pantera and GT5 wheel
> bolt/stud?
>
> How did I know which GT5 wheel bolt/stud I have?
> I have the GR3/GT5/GT5-s brake caliper…
>
> >From PI www.pim.net/1.1pim.html
> Stud Front and Rear 2-7/32” (56.3 mm) Length
> Stud Front and Rear GT5 2-13/16” (71.2 mm) Length
>
>>>Yes, that's right. GT5 wheels are thicker in the center, which is why
they require longer studs. I think you probably have standard-length studs
since your car has 8 and 10-inch wheels.
>
> questions 2
> What is the minimal thickness of the GR3/GT5/GT5-s brake rotor?
> When need/must I changes…
>
> Front rotor 288 x 31.75 mm (11.35 x 1.25”)
> Rear rotor 274.5 x 20 mm (10.8 x 0.79”)
>
>
>>>That sounds just fine. It seems that in the brake industry, .80" and
1.25" are standard thicknesses. It's possible that there are markings
lightly stamped into the rotor somewhere that specify the minimum thickness, but
if not, just use your judgement.
I think you're in good shape. :>)
Mike
**************
Big savings on Dell XPS Laptops and Desktops!
(http://pr.atwola.com/promoclk/100126575x1219799634x1201361008/aol?redir=http:%2F%2Fad.d
oubleclick.net%2Fclk%3B214133440%3B36002254%3Bj)
More information about the DeTomaso
mailing list