[DeTomaso] Wheel bolt/stud and Brake rotor

[Anders Hellberg]

This is the measurement on new rotors, NOT my. I just wrote them so you should know which rotor I talking about…

Front rotor 288 x 31.75 mm (11.35 x 1.25”)
Rear rotor 274.5 x 20 mm  (10.8 x 0.79”)

Yes I have 8 and 10-inch wheels but I must have wheels spacer due to the big GR3 brakes.

I can’t use De Tomaso spare wheel...

Anders


-----Ursprungligt meddelande-----
Från: detomaso-bounces at realbig.com
[mailto:detomaso-bounces at realbig.com]För MikeLDrew at aol.com
Skickat: den 23 april 2009 10:08
Till: detomaso at luleweb.se; detomaso at realbig.com
Ämne: Re: [DeTomaso] Wheel bolt/stud and Brake rotor


Anders,

You wrote:

> questions 1
> Is it only the length as are difference between STD Pantera and GT5 wheel
> bolt/stud?
> 
> How did I know which GT5 wheel bolt/stud I have?
> I have the GR3/GT5/GT5-s brake caliper…
> 
> >From PI     www.pim.net/1.1pim.html
> Stud Front and Rear 2-7/32” (56.3 mm) Length
> Stud Front and Rear GT5 2-13/16” (71.2 mm) Length
> 
>>>Yes, that's right.   GT5 wheels are thicker in the center, which is why 
they require longer studs.   I think you probably have standard-length studs 
since your car has 8 and 10-inch wheels.


> 
> questions 2
> What is the minimal thickness of the GR3/GT5/GT5-s brake rotor?
> When need/must I changes…
> 
> Front rotor 288 x 31.75 mm (11.35 x 1.25”)
> Rear rotor 274.5 x 20 mm  (10.8 x 0.79”)
> 
> 

>>>That sounds just fine.   It seems that in the brake industry, .80" and 
1.25" are standard thicknesses.   It's possible that there are markings 
lightly stamped into the rotor somewhere that specify the minimum thickness, but 
if not, just use your judgement.

I think you're in good shape. :>)

Mike


**************
Big savings on Dell XPS Laptops and Desktops! 
(http://pr.atwola.com/promoclk/100126575x1219799634x1201361008/aol?redir=http:%2F%2Fad.d
oubleclick.net%2Fclk%3B214133440%3B36002254%3Bj)
_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso