[DeTomaso] Rubber decklid stops

[Dave McManus]

Wilkinson has them. I think about $9 ea

-----Original Message-----
From: JDeRyke at aol.com [mailto:JDeRyke at aol.com] 
Sent: Tuesday, September 30, 2008 1:06 AM
To: panteradon at gmail.com; detomaso at realbig.com
Subject: Re: [DeTomaso] Rubber decklid stops

In a message dated 9/27/08 19 04 45, panteradon at gmail.com writes:

>  Where can one get the rubber stops that sit on top of the bolts and
> support the read decklid?
>
Not sure- never heard of any falling off. Mine remove from the metric
hex-bolt heads with some difficulty and appear to have been molded for that
size hex.
Try one of the Pantera vendors who may have some from a salvaged Pantera, to
add to your bolts. Or if the bolts are gone, check the thread of the welded
nuts and buy some to fit. Those bolts will adjust for deck height providing
they
aren't seized! Mine went the other way- the spot welds on one nut popped
loose & I re-welded it. Good luck- J Deryke



**************
Looking for simple solutions to your real-life financial
challenges?  Check out WalletPop for the latest news and information, tips
and
calculators.
      (http://www.walletpop.com/?NCID=emlcntuswall00000001)