[DeTomaso] Ball joint zerks
JDeRyke at aol.com
JDeRyke at aol.com
Mon Jul 28 22:05:01 EDT 2008
In a message dated 7/28/08 1:56:27 PM, asajay at asajay.com writes:
> should I install the zerk in the depressed center of the ball joint housing
> (which seems it would be awfully close to the ball)....
>
If you use a std zerk, the greasegun won't attach. I recommend attaching in
the depressed center using a 1/2" long extension. I did mine in the late '80s
and they work just fine. FWIW, you should also do the tie rod ends. In all the
joints you'll only get two or three threads but thats enough. Tap 1/4-28
thread.
> or should I install it in the raised outer ring portion?
>
THeres a coil spring inside to keep tension on the ball. Drilling here, you
can nick the spring, failing it. Good luck- J Deryke
**************
Get fantasy football with free live scoring. Sign up for
FanHouse Fantasy Football today.
(http://www.fanhouse.com/fantasyaffair?ncid=aolspr00050000000020)
More information about the DeTomaso
mailing list