[DeTomaso] Fuel Line Question

[Art Stephens]

Thank you Dave,
     Here's the link for the pumps;   www.robbmcperformance.com

Art



----- Original Message ----- 
From: <adin at frontier.net>
To: "Art Stephens" <artstephens at charter.net>
Sent: Friday, January 25, 2008 11:29 AM
Subject: Re: [DeTomaso] Fuel Line Question


My guess is that the 3/8 would be fine for street driving.  Extended
high rpm may tax the system. (thanks for the heads up - I'll need to
think about this in the future.)ORRs are a little easier than
Bonneville (less WOT time).

Do you have a website for those fuel pumps?

thanks,


Quoting Art Stephens <artstephens at charter.net>:

>      I'm getting ready to drill and tap my fuel tank drain plug for   a 
> 3/8 NPT fitting and fuel line to run to my fuel pump.  I don't   imagine 
> there is a readily available reducer to go from the tank   threads to NPT? 
> I thought about using a 1/2 inch line from the tank  to the pump,  but it 
> looks like 3/8 fuel filters are a lot easier  to  come by.  I am using the 
> RobbMc mechanical fuel pump with 3/8  ports  that is supposed to support 
> 550 HP.  Any thoughts?
>
> Thanks,
> Art
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>





-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.19.11/1243 - Release Date: 1/25/2008 
11:24 AM