[DeTomaso] Dynojet Question
Doug Braun
doug at silicondesigns.com
Tue Apr 29 18:50:53 EDT 2008
Clay,
You want to run it in the gear that has the closest ratio to 1:1. For most
Panteras this will be 3rd gear which has a ration of 1.04:1. Look at the
tag on the side of your ZF and it'll list the ratios.
The last time I ran mine on a chassis dyno, we hooked the safety straps to
the rear sway bar near the mounts. Don't hook to the lower control arms,
they might bend!
Doug Braun
-----Original Message-----
From: detomaso-bounces at realbig.com
[mailto:detomaso-bounces at realbig.com]On Behalf Of clay willmott
Sent: Tuesday, April 29, 2008 1:58 PM
To: List Pantera
Subject: [DeTomaso] Dynojet Question
I am new to chassis dyno (Never even seen one) and will have my car done in
the morning for a regular dyno and carb adjustments if needed.
I had a couple of questions:
1. Is third gear the best gear to run HP/Torque? I seem to recall reading
this due to ratios on the ZF.
2. Where exactly should I put the safety strap attachments at the rear of
the car?
Is there anything else I need to know or do?
Thanks
Clay
More information about the DeTomaso
mailing list