[DeTomaso] Armando Pan - 8 quarts or 10

[Asa Jay Laughton]

Mike,

I used to be an Amsoil dealer, until it just seemed to hard to get (my 
direct kept changing and I lost track).  I used it in the Mach I for 
years.  Loved it.  Now I just buy synthetic from Napa, it's easier to get.

Asa Jay

Asa Jay Laughton, MSgt, USAFR, Retired

& Shelley Marie
Spokane, WA

1973 Pantera L 5533
[ASASCAT]
    
******************************     
http://www.asajay.com
http://www.351c.info
  



Mike Thomas wrote:
> I've just done the first full oil/filter change on my new motor with an
> Armando oil pan.  Are these things 8 or 10  quarts?  I put 8 quarts in, ran
> the motor for a while to make sure the new filter was flooded and let it sit
> to settle while I was working on something else.  When I checked the
> dipstick with the 8 quarts in, it registers just below the full line.
> Should I add the other 2 quarts?  I do recall reading that we should run
> over what the stick reads, and it reads the same for this pan as the stock
> pan..
>
> By the by, what experience does the list have with Amsoil Synthetic 10/40.
> This is what my builder recommended following the break-in, and what I put
> in today.
>
> Thanks in advance!
> Mike Thomas
> Panteras Northwest 
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>
>
>