[DeTomaso] Possible club/list/forum 351C dyno project?

[sigbjørn eskeland]

hello Daniel...
i still think is a 2V.. do you have the measurement of the intake holes?.. a
standard 4v head intake measure ca 44mm with and ca 63mm height.. the
funnelweb should measure ca 44mm x 53mm..
I think I remember when i looked at it the opening was smaller than that,
less than 40mm x less than 50mm.. or check it out..?
the intake was done ready for polish, and the writing was grind ed of,
that's why I had to check it out some more, but look at it Daniel.

sigbjørn




On 10/18/07, Daniel C Jones <daniel.c.jones2 at gmail.com> wrote:
>
> > I have a funnelweb 2v intake you can test.. it will be sent to mike drew
> very
> > soon.. and its for SALE if anyone want to buy it after the testing.. i
> bought
> > it on eBay and it was a 2v not 4v he said it was.. a Little
> disappointing...
>
> Sigbjørn,
>
> I received the Parker Funnelweb from Mike Drew.  It is not a 2V intake.
> It is a 4V intak but the ports are smaller than standard 4V ports because
> the intake is designed to be used with Terry Parker's 4V head port
> stuffers:
>
>
> http://www.bacomatic.org/gallery2/v/hidden/dan/dan-cars/album04/album07/album23/351C_Funnel_Tongues_01.jpg.html
>
> http://www.bacomatic.org/gallery2/v/hidden/dan/dan-cars/album04/album07/album23/351C_Funnelweb_4V_03.jpg.html
>
> I'd still like to use it for the dyno test but I thought you should be
> aware of
> this before shopping for a replacement.
>
> Dan Jones
>
> On 9/24/07, sigbjørn eskeland <sig916 at gmail.com> wrote:
> > I have a funnelweb 2v intake you can test.. it will be sent to mike drew
> > very soon..
> > and its for SALE if anyone want to buy it after the testing..
> > i bought it on eBay and it was a 2v not 4v he said it was.. a Little
> > disappointing...
> >
> > Sigbjørn E
> > Norway..
>