[DeTomaso] Trunion for ZF linkage
MikeLDrew at aol.com
MikeLDrew at aol.com
Tue Oct 9 22:25:14 EDT 2007
In a message dated 10/9/07 4:23:54 PM, jimgray at cableone.net writes:
>
> Is there an ideal installed height for the trunion that bolts to the frame
> and through which the ZF linkage passes? It appears that if this height
> adjustment is off the linkage could contact the side of the bellhousing.
> Mine seems exceedingly close and I'm wondering if it may at time interfere
> with shifting.
>
> Any thoughts?
>
It's an eyeball thing. Too low, and it hits the chassis. Too high and it
hits the bellhousing. It's not a particularly critical measurement--it just
has to clear under all circumstances.
Mike
**************************************
See what's new at
http://www.aol.com
More information about the DeTomaso
mailing list