[DeTomaso] Best valve spring compressor
Tomas Gunnarsson
guson at home.se
Tue Nov 13 13:21:41 EST 2007
I did a couple of weeks ago. I think it took me about five minutes to get all eight valves out of a head with a mechanical lever type compressor ("parallelogram" type).
Tomas
----- Original Message -----
From: "Paul - Home" <thedrol at pobox.com>
To: <unlisted-recipients:>; <no To-header on input>
Cc: "'DeTomaso Forum'" <detomaso at realbig.com>
Sent: Monday, November 12, 2007 11:30 PM
Subject: Re: [DeTomaso] Best valve spring compressor
> Have you used this on a Cleveland engine? I was concerned that you
> wouldn't be able to compress the spring enough to get the valve keepers
> out. The one time I used this type was on a four cylinder head and it
> didn't work too well. If it works well on a Cleveland head, I expect it
> would be easier than the hand operated C-Clamp method which for me was a
> pain. It took a lot of time to align everything and due to the amount
> of force required to activate the C-clamp, it was difficult to keep it
> properly aligned.
>
> As for the air operated C-Clamp, it was a dream. All of the springs on
> a head could be removed in a matter of minutes. As you press the air
> actuator button the c-clamp extends slowly, let go as you get close to
> properly align everything (it doesn't retract) then hit the actuator
> again to compress the spring fully and you're done.
>
> Paul
> #9270
>
>
> Larry - Ohio Time Corp wrote:
>> Hi Dug,
>>
>> I have used this kind for 35 years. I find them EZer to use then the big
>> C-Clamps models. I have never used the air model. As someone said remember
>> to wack the top of the spring with a rubber mallet to loosen the keepers up.
>>
>> http://www.nextag.com/KD-Tools-KD-2078-531846056/prices-html
>>
>>
>> Larry (tool whore) - Cleveland
>>
>> -----Original Message-----
>> From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] On
>> Behalf Of Doug Braun
>> Sent: Monday, November 12, 2007 11:18 AM
>> To: DeTomaso Forum
>> Subject: [DeTomaso] Best valve spring compressor
>>
>> Hey Guys,
>>
>> What experiences has anyone had with valve spring compressors?.
>> This would
>> be the type for removing valve stem locks when the heads are off the engine.
>> Am I correct in assuming the "C"-clamp type are a better bet than the stud
>> mount type for removing stubborn valve stem locks?
>>
>> Doug Braun
>> blue 73L #5505
>>
>>
>> _______________________________________________
>>
>> Detomaso Forum Managed by POCA
>>
>> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>>
>> DeTomaso mailing list
>> DeTomaso at list.realbig.com
>> http://list.realbig.com/mailman/listinfo/detomaso
>>
>> _______________________________________________
>>
>> Detomaso Forum Managed by POCA
>>
>> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>>
>> DeTomaso mailing list
>> DeTomaso at list.realbig.com
>> http://list.realbig.com/mailman/listinfo/detomaso
>>
>>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>
More information about the DeTomaso
mailing list