[DeTomaso] Question on MD's Russ Fulps stroker motor

[Jason Eaton]

Understood, check out the following on my www site;

Al Liest put together my motor who, used to run a speed shop out in
the Bay Area here in California.

The block is a 351 cleveland 4 bolt main, the crank is Scat 4" stroke
crank, the rods are Eagle H beam, the cam is Com Cams, as are the
roller rockers, and valve springs. The valves are mildon stainless.
The heads are ford motorsport A3 heads and the manifold is a roush
single plane. The carb is a QuickFuel 850cfm carb. I have an alumnium
flywheel and centerforce clutch.

I have a Electromotive ignition system and use a "dummy" plug
distributor so I dont have issues with gear drive wear on my
distributor.

I believe it has somewhere between 20-30k miles on it and most of that
is very hard driving on the track and those sorts of events.

Motor Parts

http://www.jasoneaton.net/pantera/blosxom.pl/2003_01_27.html
http://www.jasoneaton.net/pantera/blosxom.pl/2000_11_19.html
http://www.jasoneaton.net/pantera/blosxom.pl/2000_11_17.html
http://www.jasoneaton.net/pantera/blosxom.pl/2001_03_06.html

Dyno Sheet

http://www.jasoneaton.net/pantera/blosxom.pl/2004_06_26.html

I suspect we are about 500hp at the flywheel now after more recent
modifications of carb. There was a right up in last years PI mag, last
summer.

Let me know if you want more info :)

On 5/16/07, Art Stephens <artstephens at charter.net> wrote:
> Jason,
>     We want details!  (or at least I do).  So how many miles do you have on
> this engine?  Is it burning any oil?  I presume it is .030 over?  How about
> dyno numbers?  Good luck at the Nevada Open!  I hope to join youse guys out
> there one of these days.
>
> Art
>
>
> ----- Original Message -----
> From: "Jason Eaton To: doug at silicondesigns.com List-Subscribe:"
> <jason.eaton at gmail.comhttp://list.realbig.com/mailman/listinfo/detomaso>;
> "Sender: detomaso-bounces at realbig.com"
> <mailto:detomaso-request at list.realbig.com?subject=subscribe>
> Cc: "Mad Dog Antenucci" <teampantera at yahoo.com>; "DeTomaso Forum"
> <detomaso at realbig.com>
> Sent: Monday, May 14, 2007 10:18 PM
> Subject: Re: [DeTomaso] Question on MD's Russ Fulps stroker motor
>
>
> > Just wanted to mention my 408 stroker has defied all odds and
> > outlasted my attempts to blow it up.
> >
> > 5 track events ( one back to back double runs ), one open road race,
> > and another open road race this week.
> >
> > I have also ran the car rich, overheated several times, and run the
> > car lean on the dyno to 7k.
> >
> > Only ever one issue cause by me leaving a loose adjuster nut on the rocker
> > arm.
> >
> > She's been real good to me ... knock on wood!
> >
> > On 5/14/07, Doug Braun <doug at silicondesigns.com> wrote:
> >> Hey Mad Dog,
> >>
> >>        You've had great success with the longevity on your stroker
> >> motors.  Maybe
> >> you've mentioned it before and I missed it but whose stroker kit have you
> >> been using?
> >>
> >> Doug Braun
> >> blue 73L #5505
> >>
> >>
> >>
> >>
> >> _______________________________________________
> >>
> >> Detomaso Forum Managed by POCA
> >>
> >> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
> >>
> >> DeTomaso mailing list
> >> DeTomaso at list.realbig.com
> >> http://list.realbig.com/mailman/listinfo/detomaso
> >>
> > _______________________________________________
> >
> > Detomaso Forum Managed by POCA
> >
> > Archive Search Engine Now Available at http://www.realbig.com/detomaso/
> >
> > DeTomaso mailing list
> > DeTomaso at list.realbig.com
> > http://list.realbig.com/mailman/listinfo/detomaso
> >
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>