[DeTomaso] Distributor engagement
Paul - Home
thedrol at pobox.com
Wed Aug 29 16:11:05 EDT 2007
After thinking about this a little more, moving the rotor won't work.
You can put a long socket on the oil pump drive shaft and turn it a
little bit and keep trying to put the distributor back in the hole.
If you choose to move the crank, you will have to reverify your static
ignition timing.
Paul
#9270
Paul - Home wrote:
> Try turning the rotor. It has to engage with the hex oil pump drive shaft.
>
> Paul
> #9270
>
> Arnold Pleuss wrote:
>> HELP!!! Currently trying to install a duraspark distributor back into the block. It does not want to drop the last 1/4 inch.
>>
>> I would appreciate any ideas what is needed to get the distributor to seat correctly.
>>
>> Thanks in advance for any advice.
>>
>> Arnie #5725 73L
>> _______________________________________________
>>
>> Detomaso Forum Managed by POCA
>>
>> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>>
>> DeTomaso mailing list
>> DeTomaso at list.realbig.com
>> http://list.realbig.com/mailman/listinfo/detomaso
>>
>>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>
>
More information about the DeTomaso
mailing list