[DeTomaso] Distributor engagement

wkooiman at earthlink.net wkooiman at earthlink.net
Wed Aug 29 19:40:29 EDT 2007


I always just turn the crank a little with the dist in the hole (with a socket/long bar on the damper bolt).

Like many things in life, it only takes a couple of inches, and it pops down into the hole.

-----Original Message-----
>From: Paul - Home <thedrol at pobox.com>
>Sent: Aug 29, 2007 3:11 PM
>To: unlisted-recipients at null, null at null
>Cc: detomaso at realbig.com
>Subject: Re: [DeTomaso] Distributor engagement
>
>After thinking about this a little more, moving the rotor won't work. 
>You can put a long socket on the oil pump drive shaft and turn it a 
>little bit and keep trying to put the distributor back in the hole.
>
>If you choose to move the crank, you will have to reverify your static 
>ignition timing.
>
>Paul
>#9270
>
>Paul - Home wrote:
>> Try turning the rotor.  It has to engage with the hex oil pump drive shaft.
>> 
>> Paul
>> #9270
>> 
>> Arnold Pleuss wrote:
>>> HELP!!!  Currently trying to install a duraspark distributor back into the block. It does not want to drop the last 1/4 inch. 
>>>
>>> I would appreciate any ideas what is needed to get the distributor to seat correctly.
>>>
>>> Thanks in advance for any advice.
>>>
>>> Arnie      #5725  73L
>>> _______________________________________________
>>>
>>> Detomaso Forum Managed by POCA
>>>
>>> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>>>
>>> DeTomaso mailing list
>>> DeTomaso at list.realbig.com
>>> http://list.realbig.com/mailman/listinfo/detomaso
>>>
>>>
>> _______________________________________________
>> 
>> Detomaso Forum Managed by POCA
>> 
>> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>> 
>> DeTomaso mailing list
>> DeTomaso at list.realbig.com
>> http://list.realbig.com/mailman/listinfo/detomaso
>> 
>> 
>_______________________________________________
>
>Detomaso Forum Managed by POCA
>
>Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
>DeTomaso mailing list
>DeTomaso at list.realbig.com
>http://list.realbig.com/mailman/listinfo/detomaso




More information about the DeTomaso mailing list