[DeTomaso] ZF Reverse switch nuts
Julian Kift
julian_kift at hotmail.com
Sat Jun 29 01:31:07 EDT 2024
Ken,
I have never had to remove the housing to remove the switch so one nut. Remember to set the depth correctly as if the switch is set too deep it will prevent selecting reverse. Thinking about that last sentence, if there were 2 nuts you'd have to keep removing the housing adjusting switch depth and testing to get it right.
Julian
________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of Ken Green via DeTomaso <detomaso at server.detomasolist.com>
Sent: Friday, June 28, 2024 10:12 PM
To: Detomaso Email List <detomaso at detomasolist.com>
Subject: [DeTomaso] ZF Reverse switch nuts
Are there 2 thin nuts that sandwich the housing or just one that tightens the switch body against the housing?
Thanks
Ken
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fserver.detomasolist.com%2Fmailman%2Flistinfo%2Fdetomaso&data=05%7C02%7C%7C13c437df4ca74ea7547708dc97fa209b%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638552347794238660%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sdata=Xse9EKSHoFHKm0DMY9tee346mWaP1muYGVFiapc3NJY%3D&reserved=0<http://server.detomasolist.com/mailman/listinfo/detomaso>
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
Ken,
I have never had to remove the housing to remove the switch so one nut.
Remember to set the depth correctly as if the switch is set too deep it
will prevent selecting reverse. Thinking about that last sentence, if
there were 2 nuts you'd have to keep removing the housing adjusting
switch depth and testing to get it right.
Julian
__________________________________________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of
Ken Green via DeTomaso <detomaso at server.detomasolist.com>
Sent: Friday, June 28, 2024 10:12 PM
To: Detomaso Email List <detomaso at detomasolist.com>
Subject: [DeTomaso] ZF Reverse switch nuts
Are there 2 thin nuts that sandwich the housing or just one that
tightens the switch body against the housing?
Thanks
Ken
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
[1]https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fserv
er.detomasolist.com%2Fmailman%2Flistinfo%2Fdetomaso&data=05%7C02%7C%7C1
3c437df4ca74ea7547708dc97fa209b%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%
7C0%7C638552347794238660%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLC
JQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sdata=Xse9EKS
HoFHKm0DMY9tee346mWaP1muYGVFiapc3NJY%3D&reserved=0
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list