[DeTomaso] Titanium nuts in Stainless Steel studs?
Julian Kift
julian_kift at hotmail.com
Tue Jul 30 16:40:18 EDT 2024
Titanium is just as bad as stainless for its tendency for galling.....
Julian
________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of Mike Drew via DeTomaso <detomaso at server.detomasolist.com>
Sent: Tuesday, July 30, 2024 1:19 PM
To: Ken Green <kenn_green at yahoo.com>
Cc: Detomaso Email List <detomaso at detomasolist.com>
Subject: Re: [DeTomaso] Titanium nuts in Stainless Steel studs?
Ken,
They solve the issue so long as the thing they are being threaded onto is not stainless…
Mike
Sent from my iPad
> On Jul 30, 2024, at 13:10, Ken Green via DeTomaso <detomaso at server.detomasolist.com> wrote:
>
> Searching ebay I can't find SS 7/16 12 point nuts but find titanium nuts:
>
> https://www.ebay.com/itm/256226992519
>
> I thought titanium was expensive, but there are about the same cost as SS. Do they solve the stainless galling issue?
>
> Ken
>
>
>
>
>
>
> On Friday, July 26, 2024 at 09:04:04 PM PDT, Asa Jay Laughton <asajay at asajay.com> wrote:
>
>
>
>
>
> I’ve not used them for the bellhousing but have for many other places. I really like them especially on things like the valve covers and carb mounting. Helps love things up easily and get the nuts started without dropping them.
>
> TPR Seal of Approval.
>
> Asa Jay
>
> Sent via radio waves
>
>> On Jul 26, 2024, at 18:54, Ken Green via DeTomaso <detomaso at server.detomasolist.com> wrote:
>>
>> I'm not sure about the length for all 6 positions but they may work. Have a rounded end which may make aligning the trans axle with the engine easier. Would need two of these kits:
>>
>> https://www.summitracing.com/parts/arp-400-0904
>>
>> I have ARP stainless studs with 12 point stainless flange nuts on the ZF, so these would match.
>>
>> thanks,
>>
>> Ken
>
>>
>> _______________________________________________
>>
>>
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> DeTomaso at server.detomasolist.com
>> http://server.detomasolist.com/mailman/listinfo/detomaso
>>
>> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>>
>> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
>
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
Titanium is just as bad as stainless for its tendency for galling.....
Julian
__________________________________________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of
Mike Drew via DeTomaso <detomaso at server.detomasolist.com>
Sent: Tuesday, July 30, 2024 1:19 PM
To: Ken Green <kenn_green at yahoo.com>
Cc: Detomaso Email List <detomaso at detomasolist.com>
Subject: Re: [DeTomaso] Titanium nuts in Stainless Steel studs?
Ken,
They solve the issue so long as the thing they are being threaded onto
is not stainless...
Mike
Sent from my iPad
> On Jul 30, 2024, at 13:10, Ken Green via DeTomaso
<detomaso at server.detomasolist.com> wrote:
>
> Searching ebay I can't find SS 7/16 12 point nuts but find titanium
nuts:
>
> [1]https://www.ebay.com/itm/256226992519
>
> I thought titanium was expensive, but there are about the same cost
as SS. Do they solve the stainless galling issue?
>
> Ken
>
>
>
>
>
>
> On Friday, July 26, 2024 at 09:04:04 PM PDT, Asa Jay Laughton
<asajay at asajay.com> wrote:
>
>
>
>
>
> I've not used them for the bellhousing but have for many other
places. I really like them especially on things like the valve covers
and carb mounting. Helps love things up easily and get the nuts
started without dropping them.
>
> TPR Seal of Approval.
>
> Asa Jay
>
> Sent via radio waves
>
>> On Jul 26, 2024, at 18:54, Ken Green via DeTomaso
<detomaso at server.detomasolist.com> wrote:
>>
>> I'm not sure about the length for all 6 positions but they may
work. Have a rounded end which may make aligning the trans axle with
the engine easier. Would need two of these kits:
>>
>> [2]https://www.summitracing.com/parts/arp-400-0904
>>
>> I have ARP stainless studs with 12 point stainless flange nuts on
the ZF, so these would match.
>>
>> thanks,
>>
>> Ken
>
>>
>> _______________________________________________
>>
>>
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> DeTomaso at server.detomasolist.com
>> [3]http://server.detomasolist.com/mailman/listinfo/detomaso
>>
>> To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
>>
>> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
>
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> [4]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
>
> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
[5]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. https://www.ebay.com/itm/256226992519
2. https://www.summitracing.com/parts/arp-400-0904
3. http://server.detomasolist.com/mailman/listinfo/detomaso
4. http://server.detomasolist.com/mailman/listinfo/detomaso
5. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list