[DeTomaso] Pantera heater hose
jderyke at aol.com
jderyke at aol.com
Tue Jul 2 13:11:24 EDT 2024
On 7/1/24, 9:16 AM, "DeTomaso on behalf of Charles Engles" <detomaso-bounces at server.detomasolist.com <mailto:detomaso-bounces at server.detomasolist.com> on behalf of cengles at cox.net <mailto:cengles at cox.net>> wrote:
Dear Forum,
Would anyone have the Gates or Dayco part number for the
two heater hoses that have the short right angle bend on one end and
fit between the engine and the central console heater tubes? I.D. is
3/4"
Warmest regards, Chuck Engles
_______________________________________________
FWIW, Chuck, I do not use molded rubber hoses at all on cars, trucks or motorcycles. When -not if- they fail, Its just too hard to find replacements on the road. I prefer to use straight pieces of hose and metal bends attached by hose clamps. Metal bends -usually sweat-solder copper- never fail or corrode, and straight rubber hoses are available anywhere. But thats just me- J DeRyke
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com <mailto:DeTomaso at server.detomasolist.com>
http://server.detomasolist.com/mailman/listinfo/detomaso <http://server.detomasolist.com/mailman/listinfo/detomaso>
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
On 7/1/24, 9:16 AM, "DeTomaso on behalf of Charles Engles"
<[1]detomaso-bounces at server.detomasolist.com
<mailto:detomaso-bounces at server.detomasolist.com> on behalf of
[2]cengles at cox.net <mailto:cengles at cox.net>> wrote:
Dear Forum,
Would anyone have the Gates or Dayco part number for the
two heater hoses that have the short right angle bend on one end and
fit between the engine and the central console heater tubes? I.D. is
3/4"
Warmest regards, Chuck Engles
_______________________________________________
FWIW, Chuck, I do not use molded rubber hoses at all on cars, trucks or
motorcycles. When -not if- they fail, Its just too hard to find
replacements on the road. I prefer to use straight pieces of hose and
metal bends attached by hose clamps. Metal bends -usually sweat-solder
copper- never fail or corrode, and straight rubber hoses are available
anywhere. But thats just me- J DeRyke
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[3]DeTomaso at server.detomasolist.com
<mailto:DeTomaso at server.detomasolist.com>
[4]http://server.detomasolist.com/mailman/listinfo/detomaso
<[5]http://server.detomasolist.com/mailman/listinfo/detomaso>
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[6]DeTomaso at server.detomasolist.com
[7]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. mailto:detomaso-bounces at server.detomasolist.com
2. mailto:cengles at cox.net
3. mailto:DeTomaso at server.detomasolist.com
4. http://server.detomasolist.com/mailman/listinfo/detomaso
5. http://server.detomasolist.com/mailman/listinfo/detomaso
6. mailto:DeTomaso at server.detomasolist.com
7. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list