[DeTomaso] Door handle problem

Julian Kift julian_kift at hotmail.com
Sun May 14 16:38:42 EDT 2023


Jacques at Maseratisource.com has forged door handles, not cheap but infinitely better than the oem pot metal units.

Julian



Sent from Outlook<http://aka.ms/weboutlook>

________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of Christopher Kimball <ChrisVKimball at msn.com>
Sent: Sunday, May 14, 2023 11:43 AM
To: jderyke at aol.com <jderyke at aol.com>; mbefthomas2 at gmail.com <mbefthomas2 at gmail.com>; detomaso at server.detomasolist.com <detomaso at server.detomasolist.com>
Subject: Re: [DeTomaso] Door handle problem

Thank you. Tomorrow I will make some calls to see if I can get a replacement part and get it here by Saturday. Maybe that's another project that guys can help me fix!



Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable smartphone



-------- Original message --------
From: jderyke at aol.com
Date: 5/14/23 11:33 AM (GMT-08:00)
To: mbefthomas2 at gmail.com, chrisvkimball at msn.com, detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] Door handle problem

Larry Stock at PPC-Carson City NV also sells outside door handles- his upgrade has an all-metal bucket as well. On my '72 L, the door latch is held in with counter-sunk flat-head screws.


-----Original Message-----
From: Mike & Elizabeth <mbefthomas2 at gmail.com>
To: 'Christopher Kimball' <chrisvkimball at msn.com>; 'Pantera Owners Club of America' <detomaso at server.detomasolist.com>
Sent: Sun, May 14, 2023 11:14 am
Subject: Re: [DeTomaso] Door handle problem

Hopefully they didn't compromise your driver's door handle in the same manner.  Yes, you will have to drill the riveted ends of the pin to get the door handle assembly apart.  The vendors sell replacement door handles and the pin to replace the one you need to drill out.  Is the black plastic bucket in good shape?  The key is to try to drill out the rivet without damaging the bucket.

I seem to recall that PI Motorsports sells a replacement pin that uses spring clips snapped into slots in the pin to hold it in place rather than the stock rivet style which if you don't have the proper tool to mash the rivet can end up breaking things.  Reach out to PI, they should have what you'll need.

Also note Mike Drew's email on the thermostat.  You might be able to source one through him without guessing on getting the right one in time.

Mike Thomas

-----Original Message-----
From: DeTomaso <detomaso-bounces at server.detomasolist.com<mailto:detomaso-bounces at server.detomasolist.com>> On Behalf Of Christopher Kimball
Sent: Sunday, May 14, 2023 10:20 AM
To: 'Pantera Owners Club of America' <detomaso at server.detomasolist.com<mailto:detomaso at server.detomasolist.com>>
Subject: [DeTomaso] Door handle problem

Well, I disassembled my door and I found the problem with the handle. It appears that the little piece on the metal handle part Which pushes against the release inside the door to open it is snapped off because I found that piece at the bottom of the door. I suspect what happened was someone at the place where I took it to get the clear bra put on forced the handle to try to open the door when it was locked and broke it. Getting them to admit it will be another story! At this point I can't figure out how to get the handle assembly out of the door, so I can somehow disassemble it and buy a new part. It appears the moving part is riveted in to the door assembly which means I don't know how I will get it out to replace it without drilling it out. Any tips would be helpful!  Also, any ideas where I can get a new assembly from my passenger door?  Thank you. Sincerely, Chris



Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable smartphone


_______________________________________________


Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com<mailto:DeTomaso at server.detomasolist.com>
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fserver.detomasolist.com%2Fmailman%2Flistinfo%2Fdetomaso&data=05%7C01%7C%7Ccdfd8b6854424dc6b50708db54ab103a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638196865982060535%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=FONpFt23l1J9M3lQOdhf3zAa8Q9rhuXyskN9idrXk7A%3D&reserved=0<http://server.detomasolist.com/mailman/listinfo/detomaso>

To manage your subscription (change email address, unsubscribe, etc.) use the links above.

Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
   Jacques at Maseratisource.com has forged door handles, not cheap but
   infinitely better than the oem pot metal units.

   Julian

   Sent from [1]Outlook
     __________________________________________________________________

   From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of
   Christopher Kimball <ChrisVKimball at msn.com>
   Sent: Sunday, May 14, 2023 11:43 AM
   To: jderyke at aol.com <jderyke at aol.com>; mbefthomas2 at gmail.com
   <mbefthomas2 at gmail.com>; detomaso at server.detomasolist.com
   <detomaso at server.detomasolist.com>
   Subject: Re: [DeTomaso] Door handle problem

   Thank you. Tomorrow I will make some calls to see if I can get a
   replacement part and get it here by Saturday. Maybe that's another
   project that guys can help me fix!
   Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable
   smartphone
   -------- Original message --------
   From: jderyke at aol.com
   Date: 5/14/23 11:33 AM (GMT-08:00)
   To: mbefthomas2 at gmail.com, chrisvkimball at msn.com,
   detomaso at server.detomasolist.com
   Subject: Re: [DeTomaso] Door handle problem
   Larry Stock at PPC-Carson City NV also sells outside door handles- his
   upgrade has an all-metal bucket as well. On my '72 L, the door latch is
   held in with counter-sunk flat-head screws.
   -----Original Message-----
   From: Mike & Elizabeth <mbefthomas2 at gmail.com>
   To: 'Christopher Kimball' <chrisvkimball at msn.com>; 'Pantera Owners Club
   of America' <detomaso at server.detomasolist.com>
   Sent: Sun, May 14, 2023 11:14 am
   Subject: Re: [DeTomaso] Door handle problem
   Hopefully they didn't compromise your driver's door handle in the same
   manner.  Yes, you will have to drill the riveted ends of the pin to get
   the door handle assembly apart.  The vendors sell replacement door
   handles and the pin to replace the one you need to drill out.  Is the
   black plastic bucket in good shape?  The key is to try to drill out the
   rivet without damaging the bucket.
   I seem to recall that PI Motorsports sells a replacement pin that uses
   spring clips snapped into slots in the pin to hold it in place rather
   than the stock rivet style which if you don't have the proper tool to
   mash the rivet can end up breaking things.  Reach out to PI, they
   should have what you'll need.
   Also note Mike Drew's email on the thermostat.  You might be able to
   source one through him without guessing on getting the right one in
   time.
   Mike Thomas
   -----Original Message-----
   From: DeTomaso
   <detomaso-bounces at server.detomasolist.com<mailto:detomaso-bounces at serve
   r.detomasolist.com>> On Behalf Of Christopher Kimball
   Sent: Sunday, May 14, 2023 10:20 AM
   To: 'Pantera Owners Club of America'
   <detomaso at server.detomasolist.com<mailto:detomaso at server.detomasolist.c
   om>>
   Subject: [DeTomaso] Door handle problem
   Well, I disassembled my door and I found the problem with the handle.
   It appears that the little piece on the metal handle part Which pushes
   against the release inside the door to open it is snapped off because I
   found that piece at the bottom of the door. I suspect what happened was
   someone at the place where I took it to get the clear bra put on forced
   the handle to try to open the door when it was locked and broke it.
   Getting them to admit it will be another story! At this point I can't
   figure out how to get the handle assembly out of the door, so I can
   somehow disassemble it and buy a new part. It appears the moving part
   is riveted in to the door assembly which means I don't know how I will
   get it out to replace it without drilling it out. Any tips would be
   helpful!  Also, any ideas where I can get a new assembly from my
   passenger door?  Thank you. Sincerely, Chris
   Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable
   smartphone
   _______________________________________________
   Detomaso Email List is not managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   DeTomaso at server.detomasolist.com<mailto:DeTomaso at server.detomasolist.co
   m>
   [2]https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fserv
   er.detomasolist.com%2Fmailman%2Flistinfo%2Fdetomaso&data=05%7C01%7C%7Cc
   dfd8b6854424dc6b50708db54ab103a%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%
   7C0%7C638196865982060535%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLC
   JQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=FONp
   Ft23l1J9M3lQOdhf3zAa8Q9rhuXyskN9idrXk7A%3D&reserved=0
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   Members who post to this list grant license to the list to forward any
   message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

References

   1. http://aka.ms/weboutlook
   2. http://server.detomasolist.com/mailman/listinfo/detomaso


More information about the DeTomaso mailing list